Product Overview
NINGINE Concrete Carbon-Reducing Admixture (CCRA) is a liquid admixture for concrete. Through chelation-assisted solubilization, it improves the reactivity and utilization of fly ash, GGBS, and other supplementary cementitious materials. Following validation with local materials, it can reduce cement use while maintaining concrete workability, strength, and durability. It is widely applicable to ready-mix concrete plants, project batching plants, PHC pile manufacturers, and precast concrete producers.
Approx. 0.6% of Total Binder
Quantity of concrete added per cubic meter
Actual benefits may vary by region.
30%–50% Cement Reduction
Cement reduction per cubic meter of concrete
Actual benefits may vary by region.
USD 5–15 Added Value per m³ of Concrete
Efficiency improvement per cubic meter of concrete
Actual benefits may vary by region.
30%–50% Lower Carbon Emissions per m³
Emission reduction per cubic meter of concrete
Actual benefits may vary by region.
1%–5% Higher 7-Day Strength
7-day strength improvement of concrete
Actual benefits may vary by region.
5%–10% Higher 28-Day Strength
28 day strength improvement of concrete
Actual benefits may vary by region.
Conventional Concrete
Approx. 220 kg Cement/m³
Low-Carbon Concrete
Approx. 130 kg Cement/m³
Ultra-Low-Carbon Concrete
Approx. 80 kg Cement/m³
Figures are based on typical trials and applications. Actual results depend on local materials, mix design, production conditions and performance requirements.
Recommended by the Hunan Provincial Department of Industry and Information Technology
NINGINE’s Chemical Carbon-Reducing Admixture for Concrete has been included in a green and low-carbon product catalogue issued by the Hunan Provincial Department of Industry and Information Technology.
How It Works
Through polymer chelation-assisted solubilization, CCRA utilizes and enhances the cement’s inherent alkaline environment and promotes calcium hydroxide formation. Without additional alkali, it activates GGBS, fly ash and other supplementary cementitious materials, enabling them to contribute more effectively to hydration and strength development. This improves overall binder efficiency and supports partial cement replacement.
Concrete Carbon-Reducing Admixture (Non-Alkanolamine-Based)
Acts on Portland cement by utilizing its inherent alkalinity
Interacts with Ca(OH)₂ , Ca₃SiO₅ and other cement components through polymer chelation-assisted solubilization
Promotes the Formation of Calcium Hydroxide
No Additional Alkali Required
Activates GGBS, Fly Ash and Other Solid-Waste-Derived Cementitious Materials
Significantly Increases Their Contribution to Concrete Strength
Add CCRA to concrete, reduce cement content, and increase GGBS, fly ash and other industrial by-product additions to produce low-carbon concrete.
Carbon-reducing admixture
A second admixture
GGBS and fly ash
Used at higher replacement levels
Cement
Partially replaced to reduce cement consumption
Sand and aggregates
Form the concrete aggregate system
Water-reducing admixture
Used together with the carbon-reducing admixture
Final product
Low-carbon concrete
Key Benefits
Maintain Concrete Performance
Validate workability, early strength, 28-day strength and durability through local trials.
Increase Solid Waste Utilization
Increase the use of fly ash, GGBS and other industrial by-products.
Integrate with Existing Production
Compatible with PCE-based water reducers, subject to compatibility and mix validation.
Low-Investment, Fast Implementation
Third-Party Testing
NINGINE CCRA and the resulting low-carbon concrete have been tested by independent institutions, including China Building Material Test & Certification Group and the Xinjiang Academy of Building Research. Testing covers product performance, concrete strength, durability and adaptability to different environmental conditions, providing data support for trials and field applications.
Performance & Standards Verification
Technical information
|
产品形态
Form |
液体复合外加剂
Liquid admixture |
|
推荐掺量
Dosage |
胶凝材料总量的 0.6%–1.0%;以试配结果为准
0.6%–1.0% of total binder; subject to trials |
|
水泥减少幅度
Cement Reduction |
通常 20%–50%;取决于当地材料与目标性能
Typically 20%–50%; depends on local materials and target performance |
|
用水调整
Water Adjustment |
通常比基准配合比减少约 5–15 kg/m³;以试配为准
Typically about 5–15 kg/m³ lower than the reference mix; subject to trials |
|
减水剂
Water Reducer |
可与聚羧酸减水剂配合使用,不替代减水剂
Can be used with PCE; does not replace the water reducer |
|
养护
Curing |
基本沿用普通混凝土养护制度
Generally follows standard concrete curing practice |
|
包装
Packaging |
桶装、IBC 吨桶或批量交付
Drums, IBC totes or bulk delivery |
|
储存
Storage |
阴凉、通风、密封,避免阳光直射
Store sealed in a cool, ventilated place away from direct sunlight |
|
执行标准
Standard |
T/CNGMA 037—2026 |
How We Work
From Trial Validation to Full-Scale Application
Local Material & Mix Assessment
Technical & Economic Evaluation
Comparative Laboratory Trials
Customer-Site Validation
Pilot Production & Quality Confirmation
Batch Application & Long-Term Monitoring
The final solution is developed around the customer’s local cement, fly ash, GGBS, aggregates, water reducer, water conditions and production requirements. No fixed mix design is imposed.
NINGINE CCRA Field Performance Data
Based on NINGINE’s real-world applications across China, the following representative cases cover different project types, climate regions and application scenarios, demonstrating the product’s technical reliability, economic benefits and environmental value.
Frequently Asked Questions
Does CCRA replace the water reducer?
No. It can be used with PCE-based water reducers, subject to compatibility and mix validation.
What is the recommended dosage?
Typically 0.6%–1.0% of total binder, with the final dosage determined through trials.
Why are local-material trials required?
Results vary with cement, SCMs, aggregates, water reducer and water conditions; trials establish a reliable solution.
Is new equipment required?
In most cases it can be integrated into existing production, subject to an assessment of storage, dosing and feeding conditions.
Is revalidation required after material changes?
Yes. Revalidation is recommended when key materials, suppliers or target performance change.
How can I request a trial or technical evaluation?
Submit local material details, current mix design, prices and target requirements for an initial technical review.