Why is trial validation required before production use?
Trials confirm compatibility with local materials and admixtures and verify workability, setting time, early strength, 28-day strength and project-specific requirements. They are essential for a reliable application plan.
What information is required for a trial request?
Please provide the current mix design, material sources and test data, concrete grade, slump and retention requirements, production or construction process, temperature, daily output and cost- or carbon-reduction targets. The technical team will then confirm whether local-material samples are required.
Is the CCRA dosage fixed?
No. Dosage must be determined through trials based on raw materials, mix design, water-reducer system and performance targets, then calibrated during pilot production. Dosages from other projects should not be adopted without validation.
How much cement can typically be reduced?
Cement-reduction potential depends on local materials, concrete grade, construction performance and durability requirements, so no fixed percentage should be assumed. Comparative trials are used to determine a suitable range that meets the customer's targets.
Can concrete performance be maintained with less cement?
With a properly optimized and validated mix, workability, setting time, early strength, 28-day strength and production stability can be controlled. Final performance must be confirmed with the customer's materials and project test data.
Can CCRA be used with PCE-based water reducers?
Yes, but compatibility varies among PCE and binder systems. Compatibility, workability and strength must be validated before use, with water, water-reducer dosage and mix design adjusted accordingly.
What should be monitored during full-scale production?
Monitor raw-material batches and moisture, dosing accuracy, slump and retention, setting time, demoulding or early strength, 28-day strength and field feedback. Revalidate the solution when materials or production conditions change significantly.
How do we move from trials to full-scale production?
Proceed through comparative laboratory trials, small-scale pilot production, process calibration, quality-criteria confirmation and consecutive-batch monitoring before expanding application. Avoid unvalidated full-scale switching.
Do you provide free samples for trial mixing?
Subject to project evaluation, free samples of up to 5 kg may be provided, while international courier or other shipping costs are borne by the customer. Please provide the application, raw materials and trial requirements so that our technical team can confirm the suitable product grade and sample quantity.
Is major equipment investment required?
Major equipment investment is generally not required. CCRA can be integrated into the customer's existing process, subject to confirmation of storage, metering, transfer and dosing conditions. Minor adjustments may be needed.